Loading...

RTS TriggerShieldTM

Filters Sort results
Model NamePin TypePriceQuantityCart
TSM4  (Standard H/T Pins)  
$69.99
quantity" autocomplete="off" />
Add to Cart
TSM4C  (Large H/T Pins)      
$69.99
     quantity" autocomplete="off" />
Add to Cart
SKU: TSM4 & TSM4C Category:

Description

RTS TriggerShield™ kits includes:
– 1 left-hand shield
– 1 right-hand shield
– 2 custom hammer/trigger pins***
– 2 screws, 2 hex wrenches
– 1 pilot lead

Firearms are not included with RTS TriggerShield™ kits. Installation instructions are included.

*** TSM4 Vs. TSM4C

Most AR-15/M-4 model rifles use the “STANDARD” (.154) hammer and trigger pins which are included with the RTS TriggerShield TSM4.

However, Semi-Automatic Colt AR-15/M-4 Lower Receivers manufactured between 1991-2009 use the “LARGE” (.170) hammer and trigger pins.

These Colt AR-15/M-4 Lowers will not function properly with “STANDARD” (.154) hammer and trigger pins. Potential malfunctions may include, but are not limited to; looseness of the internal trigger control group, multiple rounds fired on single trigger press, complete inoperability, etc.

To determine whether your Colt Lower uses “Standard” (.154) or “Large” (.170) Hammer and Trigger Pins, either measure your pins with a caliper or call Colt directly at 800.962.2658 to ask for the date of manufacture by your serial number.

If you determine that you have one of these “Large” Pin Colt Lower Receivers, please order the RTS TriggerShield TSM4C.

 

 

Additional information

Weight 0.5 oz
Dimensions 2 × 2.25 in

Reviews

There are no reviews yet.

Be the first to review “RTS TriggerShieldTM

Your email address will not be published. Required fields are marked *

Important Note
ATTENTION COLT OWNERS

Most AR-15/M-4 model rifles use the “STANDARD” (.154) hammer and trigger pins which are included with the RTS TriggerShield TSM4.

However, Semi-Automatic Colt AR-15/M-4 Lower Receivers manufactured between 1991-2009 use the “LARGE” (.170) hammer and trigger pins.  These Colt AR-15/M-4 Lowers will not function properly with “STANDARD” (.154) hammer and trigger pins. Potential malfunctions may include, but are not limited to; looseness of the internal trigger control group, multiple rounds fired on single trigger press, complete inoperability, etc.

To determine whether your Colt Lower uses “Standard” (.154) or “Large” (.170) Hammer and Trigger Pins, either measure your pins with a caliper or call Colt directly at 800.962.2658 to ask for the date of manufacture by your serial number.

If you determine that you have one of these “Large” Pin Colt Lower Receivers, please order the RTS TriggerShield TSM4C.

I ACKNOWLEDGE

    If you have any questions, please contact us via the Contact Us page on this website or email us at info@rtstriggershield.com.